Extra-low motor noise offers excellent quietness
Anti-Resonance, provides optimum torque and nulls mid-range instability
Self-test and Auto-configuration technology, offers optimum responses with different motors
Microstep resolutions programmable, from full-step to 102,400 steps/rev
Supply voltage up to +80 VDC
Output current programmable, from 0.5A to 5.6A
Pulse input frequency up to 200 KHz
Automatic idle-current reduction
Supports PUL/DIR and CW/CCW modes
Model:DM856
Phase:2
Control Mode:Step & Dir
Max Input Frequency:200Khz
Input Voltage Range:20 - 80 VDC
Suggested Power Supply Voltage Range:24-72 VDC
Output Current:0.50 - 5.60 A
Software Cofig. Resolution Range:200 - 102,400 (increased by 200)
# of DIP Switch Resolution Configurations:15
DIP Switch Resolution Setings:400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
Software Cofig Current Range:0.50 - 5.60A (increase by 0.1A)
# of DIP Switch Current Configurations:7
DIP Switch Current Configurations:2.1A, 2.7A, 3.2A, 3.8A, 4.3A, 4.9A, 5.6A
Logic Current Range:7-16mA (10mA typical)
Logic Voltage Range:4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low
Communication Type:RS232
Pulse enabled at:Rising edge
Idle Current Percent:50 %
Software Config. Idle Current Percent:0-100%
# of Digital Inputs:3
Step Width:2,500 ns
Minimal Direction Setup Time:5,000 ns
Protection:Over current; over voltage; phase error
Isolation Resistance:500M Ohm
Environment:Avoid dust, oil fog and corrosive gases
Ambient Temporature:0-50°C
Humidity:40–95% RH
Operating Temporature:0-70°C
Vibration:5.9 m/s2 Max
Storage Temporature:-20-65°C
Specification:4.65 X 2.97 X 1.30 Inches
Weight:0.60 lb