Описание
 | ||||||||||
| ||||||||||
| ||||||||||
|
manual pressure testing pump
Product Specifications
Pressure: 6MPA volume: 8L Weight: 6KGS
Instructions for use:
1. Place the water hose connected to the measured water pipeline (Note: the joint sealing);
2. The test pipe filled with water, and air after discharge, turn off the switch;
3. the water tank filled with water, and then tilt the lower plate rod and began pressing pressure test;
4. When the gauge reading rises to the required pressure, then you can stop pressing;
5. Stop pressing after, if the pressure shown on the gauge does not drop, just to prove that the pipeline pressure resistance is good. On the contrary, it is proof of good sealing performance test pipeline, a leak caused by a pressure drop
 |
Характеристики
- Давление
- Низкое давление
- Применение
- Вода / test instrument of measuring pressure vessel equipment
- Питание
- Гидравлический
- Номер модели
- ZD-50
- Наличие стандарта
- Стандарт
- Структура
- Manual testing pump
- Основы
- Manual testing pump
- Топливо
- Manual
- SPEC
- 50kg
- material
- cast iron
- Flow volume
- 16ml/times
- Pressure
- 0-50kg/cm2
Для покупки товара Красный руководство Тесты насос нажмите кнопку "купить сейчас".
Если вы хотите купить другой товар из категории обустройство дома или сантехника то перейдите по ссылкам вверху страницы.