Описание

7 шт. петли для дверей и окон для завивки Древесины Сверло Дырокол Самоцентрирующийся _ WK

Features:
Precise Positioning: Drill bush for precise positioning, will not move. High speed steel body designed, durable, rustproof and excellent for use.
Sawdust Discharged from Hole: Sawdust will be automatically discharged from the top of the holes on both sides, without drill blocked. Never miss the center of the hole again, references from the hinge bevels!
Unique Design: Unique design and perfect punch effect. Applicable for the installation of the door hinge. Easy to use and install, change bits fast which one-handed load and release.
Bits are surrounded by spring loaded guides that have a window to show the drill bit depth while making adjustments.
They come in the 3 most common hinge screw sizes 7/6inch, 9/6inch, 11/64inch.
The 7/64inch is good for drilling holes in smaller hinges and hardware like decorative boxes.
The 9/64inch is good for medium to full size hinges and hardware.
The 11/64inch is good for door hinges, gate locks and all large hardware.
Specification:
Device Type:Hinge Hardware Drill
Material:Brass + high-speed steel
All Shank Size:1/4inch(6.35mm)
Dimensions:5/64inch, 7/64inch, 9/64inch, 11/64inch, 13/64inch, 5mm, 1/4inch
Description:
Our hinge bit set is perfect for pre-drilling hinges for screws. Great for interior and exterior doors. The spring loaded guide centers the built-in drill bit inside the holes of a door hinge, cabinet hinge, bracket, or other hardware that requires a centered hole.
Notice:
Please adjust according to the hardness of the wood, if the wood is soft, choose a smaller size; If the wood is hard, you can choose a larger size or corresponding opening tool.
5/64inch: Hole diameter is about 2mm, use about 2.2-2.8mm tapping screw.
7/64inch: Hole diameter is about 2.8mm, use about 3-3.5mm tapping screw.
9/64inch: Hole diameter is about 3.5mm, use about 4-4.5mm tapping screw.
11/64inch: Hole diameter is about 4.5mm, use about 5-5.5mm tapping screw.
5mm: Hole diameter is about 5mm, use about 5.5-6mm tapping screw.
13/64inch: Hole diameter is about 5.2mm, use about 6-6.5mm tapping screw.
1/4inch: Hole diameter is about 6.35mm, use about 7-7.5mm tapping screw.